「Seaplane Part II」の版間の差分

提供:WHITEDAY~学校という名の迷宮~PS4 攻略wiki
ナビゲーションに移動 検索に移動
編集の要約なし
編集の要約なし
 
(同じ利用者による、間の1版が非表示)
1行目: 1行目:
The
The

2020年5月31日 (日) 09:57時点における最新版

The Grumman G-21 Goose amphibious aircraft was designed as an eight-seat "commuter" plane for businessmen in the Long Island area. The Goose was Grumman's first monoplane to fly, its first twin-engined aircraft, and its first aircraft to enter commercial airline service. During World War II, the Goose became an effective transport for the US military (including the Coast Guard), as well as serving with many other air forces. During hostilities, the Goose took on an increasing number of combat and training roles. The adaptable transport continued in postwar use.

In 1936, a group of wealthy residents of Long Island, including E. Roland Harriman, approached Grumman and commissioned an aircraft that they could use to fly to New York City. In response the Grumman Model G-21 was designed as a light amphibian transport. The typical Grumman rugged construction was matched to an all-metal, high-winged monoplane powered by two 450 horsepower (340 kW) Pratt & Whitney R-985 Wasp Jr. nine-cylinder, air-cooled radial engines mounted on the leading edge of high-set wings. The deep fuselage served also as a hull and was equipped with hand-cranked retractable landing gear. First flight of the prototype took place on May 29, 1937.

The fuselage also proved versatile as it provided generous interior space that allowed fitting for either a transport or luxury airliner role. Having an amphibious configuration also allowed the G-21 to go just about anywhere, and plans were made to market it as an amphibian airliner. Some had a hatch in the nose, which could remain open in flight.

The Supermarine Sea Eagle was a British, passenger-carrying, amphibious flying boat. It was designed and built by the Supermarine Aviation Works for its subsidiary, the British Marine Air Navigation Co Ltd, to be used on their cross-channel route between Southampton, the Channel Islands and France.

Three aircraft were constructed, G-EBFK, G-EBGR and G-EBGS and the regular service between Southampton and Guernsey began on 25 September 1923 (the planned service to France was never implemented). This was the world's first scheduled passenger air service by flying boat. However, G-EBFK crashed on 21 May 1924; in January 1927, G-EBGS was lost when it was rammed by a ship in the harbor of St Peter Port, Guernsey. The third aircraft continued on the route until 1928 when it was replaced by a Short S.8 Calcutta.

The wooden hull of the surviving Sea Eagle, G-EBGR, was retained by Vickers until 1949, when they presented it to the British Overseas Airways Corporation; BOAC burnt it in 1954 because of a lack of storage space.

The Vickers Viking was a British single-engine amphibious aircraft designed for military use shortly after the World War I. Later versions of the aircraft were known as the Vickers Vulture and Vickers Vanellus.

Research on Vickers' first amphibious aircraft type began in December 1918 with tests of alternative fuselage/hull designs occurring in an experimental tank at St Albans in Hertfordshire, England. A prototype, registered G-EAOV, was a five-seat cabin biplane with a pusher propeller driven by a Rolls-Royce Falcon water-cooled V 12 engine. Sir John Alcock died taking this aircraft to the Paris exhibition on 18 December 1919, whilst trying to land at Côte d'Evrard, near Rouen, Normandy in foggy weather.

The next example, G-EASC, known as the Viking II, had a greater wing span and a 360 hp Rolls-Royce Eagle VIII motor. The Viking III machine, piloted by Captain Cockerell, won first prize in the amphibian class in Air Ministry competitions held in September and October, 1920.

The Type 54 Viking IV incorporated further refinements and had a wider cabin above a hull one foot wider, an example being G-EBBZ in which Ross Smith and J.M. Bennett (partners in the 1919 England to Australia flight) died on 13 April 1922 just outside the Brooklands racetrack near Weybridge in Surrey. Most of these Mark IV Vikings had a Napier Lion engine.

The next version was the Viking V, two were built for the RAF for service in Iraq.

The last Viking amphibians were built during 1923, but the name was re-used for the twin-engine VC.1 Viking airliner some 22 years later, which saw service as the Valetta with the RAF and other air arms. Some Viking amphibians were built by Canadian Vickers Limited, a subsidiary company in Montreal with no previous plane making experience.

A further development with a redesigned wing structure using the 450 hp (340 kW) Napier Lion would have been the Viking VI (Vickers designation Type 78) but known as the Vulture I. A second with a Rolls-Royce Eagle IX (360 hp, 270 kW) was the Type 95 Vulture II. Both Vultures were used for an unsuccessful around the world attempt in 1924 after the Eagle engine of the Vulture II was replaced with a Lion. With registration G-EBHO, the first set off from Calshot Seaplane Base on 25 March 1924, the other was shipped as a spare machine to Tokyo. After mechanical difficulties in earlier staged G-EBHO crashed at Akyab where it was replaced by G-EBGO on 25 June. Encountering heavy fog on the Siberian side of the Bering Sea G-ENGO crashed. Vickers salvaged a large proportion.

The Viking Mark VII ("Type 83" in Vickers numbering) was a development of the Vulture, a three-seat open-cockpit fleet spotter to Air Ministry specification 46/22 given the service name Vanellus when taken on for evaluation by the RAF against the Supermarine Seagull design.

The Canadian Vickers Vedette was the first aircraft in Canada designed and built to meet a specification for Canadian conditions. It was a single-engine biplane flying boat purchased to meet a Royal Canadian Air Force (RCAF) demand for a smaller aircraft than the Vickers Viking with a much greater rate of climb, to be suitable for forestry survey and fire protection work. The type went on to have a long and distinguished career in civil operations in Canada. Most of the topographical maps in use in Canada today are based on photos taken from one of these aircraft.

Based on a preliminary design in early 1924 for a "flying boat" by R.K.Pierson of the home company, Vickers (UK), the Canadian Vickers Vedette was a two/three-seat single-engine pusher aircraft. The design was passed over to the Canadian Vickers Limited of Longueuil, Quebec (formed in 1911) where Wilfrid Thomas Reid served as Chief Engineer.

The prototype Vedette I was first flown on 4 November 1924, powered by a 200 hp Rolls-Royce Falcon III. It was subsequently fitted with 210 hp Wolseley Viper, 200 hp Wright J-4 and 215 hp Armstrong Siddeley Lynx engines for testing. Several versions of the Vedette were produced, including two amphibious versions and one with an enclosed cabin on an all-metal hull. With the exception of these major changes, most of the remaining differences between versions were relatively minor and not externally visible. Each version was produced with a range of optional engine types.

The first production example was provided to Fairchild Aerial Surveys (c/n 31 G-CAFF) before they started designing their own survey aircraft. The majority of the production run was purchased by the RCAF where the aircraft proved popular and versatile, if somewhat temperamental due to leaky hulls that required constant maintenance (a problem afflicting all wooden hulled flying boats). The Vedette undertook photographic and forestry patrols satisfactorily and provided a backbone for RCAF flying operations through the lean peacetime years. Vedettes started a coast-to-coast photographic survey that was needed to map out the large areas of the country still unmapped. These missions lasted until the outbreak of the Second World War, and would be completed after the war with newer types. Vedettes stationed on both coasts were also used for fishing and smuggling patrols, both with the RCAF and with Western Canada Airways.

The Vedette featured prominently in a number of mercy missions, while some airmen discovered it was nearly ideal for aerial goose hunting, at least until a pilot was hit by a goose. The first Canadian to join the Caterpillar Club by using a parachute to escape from an aircraft did so from RCAF Vedette "ZF" on 17 May 1929. The pilot, C.S. (Jack) Caldwell, while testing the aircraft at the Canadian Vickers factory, entered an uncontrollable spin after the engine failed and bailed out successfully over the St. Lawrence River.

The RCAF acquired one Wright J-4 engined Vedette I in 1925 and 18 Armstrong-Siddeley Lynx IV (210 hp) engined Vedette IIs from 1926 onwards; all of these were out of service before the Second World War began. Starting in 1929, the RCAF acquired 13 Vedette Vs with higher gross weight, and 11 Vedette VAs featuring Handley Page wing slots. The single Vedette VI, with Wright J-6 engine, featured a metal hull and an enclosed cockpit. A mark V was refurbished by the factory and as the sole Vam was given a new metal hull, as well as a new serial number (the last), but it retained its RCAF call sign as "ZD." Seven Vedette VAs and the Mk VI survived into wartime service, flying with No 4(BR) Squadron and the Seaplane and Bomber Reconnaissance Training School (later No 13 OT Sqn) in Vancouver, BC until May 1941.

In addition to the RCAF, The Ontario, Manitoba and Saskatchewan governments used Vedettes extensively for scouting out forest fires in the heavily wooded areas of those provinces.

The company exported six Wright J-5 powered Vedette Vs to Chile, where they were based at Puerto Montt (which is on an inlet off the Pacific coast) with the Escuadrilla de Anfibios N° 1 (now known as the Grupo de Aviación N° 5). They were used to forge an air link between there and the capital Santiago, 569 miles (916 km) up the coast. At least one of the Vedettes, and possibly all six were lost due to hurricane force winds, which also caused the loss of two lives when one of the aircraft overturned while on the water.

The Beriev MBR-2 was a reconnaissance flying boat which entered service with the Soviet Navy in 1935.

The MBR-2 was designed by Georgy Mikhailovich Beriev and first flew in 1931, powered by an imported 373 kW (500 hp) BMW VI.Z engine. Production models, which arrived in 1934, used a licence-built version of this engine, the Mikulin M-17 of 508 kW (680 hp), and could be fitted with a fixed wheel or ski undercarriage.

Beriev also designed a commercial airliner derivation, the MP-1, which entered airline service in 1934, and a freighter version, which followed in 1936.

In 1935, an improved version was developed, the MBR-2bis, powered by the Mikulin AM-34N engine, and fitted with an enclosed cockpit, dorsal gun-turret and enlarged vertical tail. In this configuration, the machine remained in production until 1941. As with the MBR-2, the bis spawned a commercial derivative and the MP-1bis entered service in 1937.

The Aichi E13A (Allied reporting name: "Jake") was a long-range reconnaissance seaplane used by the Imperial Japanese Navy (IJN) from 1941 to 1945. Numerically the most important floatplane of the IJN, it could carry a crew of three and a bombload of 250 kg (550 lb). The Navy designation was "Navy Type Zero Reconnaissance Seaplane".

In China, it operated from seaplane tenders and cruisers. Later, it was used as a scout for the Attack on Pearl Harbor, and was encountered in combat by the United States Navy during the Battles of Coral Sea and Midway. It was in service throughout the conflict, for coastal patrols, strikes against navigation, liaison, officer transports, castaway rescues, and other missions, along with some kamikaze missions in the last days of war.

Eight examples were operated by the French Navy Air Force during the First Indochina War from 1945-1947, while others were believed to be operated by the Naval Air Arm of the Royal Thai Navy before the war. One example captured by New Zealand forces was flown by RNZAF personnel in theatre, but sank and was not repaired after a float leaked.

 

The Ar 196 was a shipboard reconnaissance aircraft built by the German firm Arado starting in 1936. The next year it was selected as the winner of a design contest, and became the standard aircraft of the Kriegsmarine (German Navy) throughout World War II.

In 1933, the Kriegsmarine looked for a standardized shipboard reconnaissance aircraft. After a brief selection period, the Reichsluftfahrtministerium (German Air Ministry, RLM) decided on the Heinkel He 60 biplane. This was one of a line of developments of a basic biplane airframe that appeared as a number of floatplanes, trainers, and fighters. Deliveries started in a matter of months.

By 1935, it was clear that the He 60's performance was lacking, and the RLM asked Heinkel to design its replacement. The result was the He 114. The first prototype was powered by the Daimler-Benz DB 600 inline engine, but it was clear that supplies of this engine would be limited, and the production versions turned to the BMW 132 radial engine instead.

The plane proved to have only slightly better performance than the He 60, and its sea-handling was poor. Rushed modifications resulted in a series of nine prototypes in an attempt to solve some of the problems, but they didn't help much. The Navy gave up, and the planes were eventually sold off to Romania, Spain and Sweden.

In October 1936, the RLM asked for a He 114 replacement. The only stipulations were that it would use the BMW 132, and they wanted prototypes in both twin-float and single-float configurations. Designs were received from Dornier, Gotha, Arado and Focke-Wulf. Heinkel declined to tender, contending that the He 114 could still be made to work.

 

With the exception of the Arado design, they were all conventional biplanes. That gave the Arado better performance than any of the others, and the RLM ordered four prototypes.

The RLM was also rather conservative by nature, so they also ordered two of the Focke-Wulf Fw 62 design as a backup. It quickly became clear that the Arado would work effectively, and only four prototypes of the Fw 62 were built.

The Ar 196 prototypes were all delivered in summer 1937, V1 (which flew in May) and V2 with twin floats as A models, and V3 and V4 on a single float as B models.

Both versions demonstrated excellent water handling, and there seemed to be little to decide one over the other. Since there was a possibility of the smaller outrigger floats on the B models "digging in", the twin-float A model was ordered into production. A single additional prototype, V5, was produced in November 1938 to test final changes.

10 A-0s were delivered in November and December 1938, with a single 7.92 mm (.312 in) MG 15 machine gun in the rear seat for defense. Five similarly equipped B-0s were also delivered to land-based squadrons. This was followed by 20 A-1 production models starting in June 1939, enough to equip the surface fleet.

Starting in November production switched to the heavier land-based A-2 model. It added shackles for two 50 kg (110 lb) bombs, two 20 mm MG FF cannons in the wings, and a 7.92 mm (.312 in) MG 17 machine gun in the cowling.

 The A-4 replaced it in December 1940, strengthening the airframe, adding another radio, and switching props to a VDM model. The apparently mis-numbered A-3 replaced the A-4, with additional strengthening of the airframe.

 The final production version was the A-5 from 1943, which changed radios and cockpit instruments, and switched the rear gun to the much-improved MG 81Z. In all versions, 541 Ar 196s (526 production models) were built before production ended in August 1944, about 100 of these from SNCA and Fokker plants.

The Ar 196C was a proposed aerodynamically-refined version. The Ar 196C project was cancelled in 1941.

 

The plane was loved by its pilots, who found it handled well both in the air and on the water. With the loss of the German surface fleet the A-1s were added to coastal squadrons, and continued to fly reconnaissance missions and submarine hunts into late 1944.

Two notable operations were the capture of HMS Seal, and the repeated interception of RAF Armstrong-Whitworth Whitley bombers. Although it was no match for a fighter, it was considerably better than its Allied counterparts, and generally considered the best of its class. Owing to its good handling on water, the Finnish Air Force utilized Ar 196 solely on transporting and supplying special forces patrols behind enemy lines, landing on small lakes in remote areas. Several fully equipped soldiers were carried in the fuselage.

The Blohm & Voss BV 222 Wiking (German: "Viking") was a large, six-engined German flying boat of World War II. Originally designed as a commercial transport, and produced in only limited quantities, it was both the largest flying boat and largest aircraft to achieve operational status during the war.

Prior to World War II, the German airline Lufthansa had carried out many transatlantic mail flights. However, their main interest was passenger transport, and they initiated a program in 1936 that culminated in an order for three BV 222 flying boats designed by Dr. Richard Vogt.

Construction of the first prototype, V1, began in January 1938, with construction of the V2 and V3 following within weeks. V1 made its test flight on 7 September 1940, carrying the civil registration D-ANTE. During trials it demonstrated that it could carry up to 92 passengers, or 72 patients on stretchers over short distances at a maximum speed of 239 mph (385 km/h). The flight characteristics were found to be satisfactory, but with some improvements required. Further trials lasted until December 1940, when the V1 passed into Luftwaffe service, receiving a military paint scheme and the Stammkennzeichen registration code of CC+EQ, later changed to the Geschwaderkennung designation of X4+AH, when in service with Lufttransportgruppe (See) 222.

The type was noted for a long flat floor inside the cabin and a large square cargo door aft of the wing on the starboard side. The flat floor was a welcome novelty for that era. Only 13 aircraft are thought to have been completed.

Originally powered by Bramo 323 Fafnir radial engines, later aircraft were powered by six 746 kW (1,000 hp) Jumo 207C inline two-stroke opposed-piston diesel engines. The use of diesels permitted refueling at sea by special re-supply U-boats. C-13 aircraft was a sole example fitted with Jumo 205C and later Jumo 205D engines.

Early aircraft were identified as V1 to V8. Production examples were designated C-09 to C-13.

V1 made seven flights between Hamburg and Kirkenes up to 19 August 1941, transporting a total of 65,000 kg (140,000 lb) of supplies and 221 wounded men, covering a distance of 30,000 km (19,000 mi) in total. After being overhauled at Hamburg, V1 was sent to Athens, from where it carried supplies for the Afrika Corps, making 17 flights between 16 October and 6 November 1941. The V1 was at this time unarmed, and was given an escort of two Messerschmitt Bf 110 heavy fighters.

Following these flights, the V1 returned to Hamburg to have defensive armament fitted, comprising a 7.92 mm (.312 in) MG 81 machine gun in the hull, two turret-mounted 13 mm (.51 in) MG 131 machine guns, and four 7.92 mm (.312 in) MG 81s in waist mounts. The registration was changed to X4+AH at the same time and the V1 formed the basis for the new air transport squadron Lufttransportstaffel 222 (LTS 222). Between 1942 and 1943, the aircraft flew in the Mediterranean theatre, until in mid-February 1943 it sank following a collision with a submerged wreck while landing at Piraeus harbour.

 

The V2 (CC+ER) made its first flight on 7 August 1941, and after extensive testing was assigned to LTS 222 on 10 August 1942 as X4+AB. Since the aircraft was intended for long-distance overwater flights, in addition to the armament fitted to the V1 she received two rear-facing wing-mounted turrets with dual 13 mm (.51 in) MG 131s, accessed via the tubular wing spar which was 1 m (3 ft 3 in) in diameter.

In 1944, the V2 participated in Operation Schatzgräber ("Treasure Seeker"), the code name of a German weather station at Alexandra Land in the Arctic, whose sick crew needed to be evacuated. The BV 222 dropped a spare wheel for a Fw 200 which had sustained damage during landing near the station.

The V3 (initially DM+SD) first flew on 28 November 1941, and was transferred to LTS 222 on 9 December 1941 After V1's sinking, V3 returned to Hamburg where she was armed. She was destroyed along with V5 on 20 June 1943 at Biscarrosse by RAF de Havilland Mosquitos of No. 264 Squadron RAF.

V4, which had an altered height tail, was also assigned to LTS 222 for Africa flights.

V6 was shot down on 21 August 1942 on the Taranto to Tripoli route by a Bristol Beaufighter; V8 was shot down on the same route on 10 December 1942.

The V7 (TB+QL), which made its first flight on 1 April 1943, was fitted with six 746 kW (1,000 hp) Jumo 207C inline two-stroke diesel engines. With a takeoff weight of 50,000 kg (110,000 lb) and a range of 6,100 km (3,800 mi), it was intended as the prototype BV 222C.

Following the Invasion of Normandy in June 1944, the remaining BV 222 aircraft were transferred to KG 200. Of these, C-09 was probably the BV 222 reported to have been strafed and destroyed by Hawker Typhoon aircraft of No. 439 Squadron RCAF on 24 April 1945 at Seedorf, while V7 and V4 were scuttled by their crews at Travemünde and Kiel-Holtenau airport respectively, at the end of the war.

C-10 was probably the BV 222 reported shot down southwest of Biscarosse on the night of 8 February 1944 by a Mosquito of No. 157 Squadron RAF.

One BV 222, V4, is said to have shot down a US Navy PB4Y Liberator of VB-105 (BU#63917) commanded by Lieutenant Evert, on October 22, 1943. Since the war this has often been mistakenly quoted as a BV 222 shooting down an Avro Lancaster.

Following the invasion of the Soviet Union in June 1941, plans were made to connect Germany and Japan by air using Luftwaffe aircraft modified for very long range flights since commercial flights to the Far East by Lufthansa were no longer possible, and it had become very dangerous for ships or U-boats to make the trip by sea. Field Marshal Erhard Milch authorized a study in to the feasibility of such direct flights and various routes were considered, including departing from German-occupied Russia and tour hà giang từ hà nội Bulgaria, and a sea route using a BV 222 flying from Kirkenes in north Norway to Tokyo via Sakhalin Island, a distance of 6,400 km (4,000 mi).

The BV 222 was one of three aircraft considered seriously for the program, along with the Focke-Wulf Fw 200 and the Heinkel He 177. The He 177 was ruled out due to it being considered unreliable and in 1943 the Junkers Ju 290 was selected for the flights.

Three BV 222s were captured and subsequently operated by Allied forces: C-011, C-012, and C-013.

C-012, captured at Sørreisa in Norway after the war along with V2, was flown by Captain Eric "Winkle" Brown from Norway to the RAF station at Calshot in 1946, with RAF serial number "VP501". After testing at Marine Aircraft Experimental Establishment at Felixstowe it was assigned to No. 201 Squadron RAF, who operated it up to 1947, when it was scrapped.

C-011 and C-013, captured by US forces at the end of World War II. On August 15 and again on August 20, 1945 LT Cmdr Richard Schreder of the US Navy performed test flights along with the German crew of one of the BV 222 aircraft that had been acquired by the US. In two flights resulting in a total flight time of 38 minutes they experienced 4 engine fires.

While many spare engines were available they were of substandard quality due to the lack of quality alloys near the end of the war, and caught fire easily. Since the aircraft was unairworthy with these engines, the aircraft was supposedly taken out to open water and sunk by a Navy Destroyer.

Other reports indicate the US captured aircraft were flown or shipped to the US. Convair acquired one for evaluation at the Naval Air Station Patuxent River, the intensive studies leading to the hull design of their Model 117 which in turn led to the R3Y Tradewind. Their subsequent fate is unknown.

The V2 aircraft briefly wore US markings in 1946. Strangely the V2 aircraft had identification markings given to her from the original V5 aircraft for Operation Schatzgräber.

V2 was later scuttled by the British who filled her with BV 222 spare parts from the base at Ilsvika to weigh her down. V2 was towed to a position between Fagervika and Monk's island where it is thought she now rests perfectly preserved on the seabed, owing to low oxygen levels in the water. There are plans to raise and restore this aircraft.

The CANT Z.501 Gabbiano (Italian: Gull) was a single engine flying boat that served with the Italian Regia Aeronautica during World War II. It had a crew of four or five and was used mainly for reconnaissance. Initially a successful aircraft, it was obsolete by 1940, but was still used throughout World War II, suffering many losses. The last aircraft was retired in 1950.

It was also the holder of two world records for long-distance flight.

Filippo Zappata was one of the foremost Italian aircraft designers. He worked for Cantieri Navali Trieste (CANT), for some years, but went to France in 1927 to work for Blériot. He returned to Italy at the prompting of Italo Balbo and resumed work at CANT on a series of new aircraft. The first of these was the Z.501, designed to replace the Savoia-Marchetti S.78. The prototype Z.501, was first flown in 1934 by test pilot Mario Stoppani.

            The aircraft had a very slim fuselage, a high parasol wing and a single wing-mounted engine nacelle. In the prototype a 560 kW (750 hp) inline Isotta-Fraschini Asso-750.RC engine was fitted, with an annular radiator that resembled a radial engine (it had no liquid cooling). The engine nacelle was extended to carry a rear-facing machine gun, while other guns were mounted in the centre fuselage and nose. All were 7.7 mm (.303 in) Breda-SAFAT. Bombs up to 640 kg/1,410 lb (4 × 160 kg/350 lb) were carried under the wings.

The aerodynamic low-drag design was typical of Zapata-designed aircraft, as was the wooden construction. Overall, the aircraft was similar to the PBY Catalina, although this aircraft had two engines and was larger.

            The production aircraft had an endurance of 12 hours. However, the record-breaking version, as was quite common at the time (mainly due to the low fuel consumption of the piston engine), greatly exceeded this. The USA had established a new endurance record of 3,860 km (2,400 mi); a Z.501 with the civilian registration I-AGIL was used to re-take the record in accordance with dictator Benito Mussolini's wishes. It was manned by Stoppani and two others, fitted with a special metal three-blade propeller, and other modifications.

On 19-20 May 1934, the modified Z.501 established a new seaplane distance record of 4,130 km (2,570 mi), by flying from Monfalcone to Massawa, in Eritrea, in 26 hours and 35 minutes. This distance record was lost to a French aircraft that flew 4,335 km (2,694 mi) on 23 June the same year, so another record flight was made on 16 July. The plan was to fly to Djibouti, a distance of 4,700 km (2,900 mi), but instead the aircraft flew 4,930 km (3,060 mi) to Berbera, Somaliland, in 25 hours.

Production of the Z.501 began in 1935 with 24 aircraft ordered from CANT, and 30 from Aereonautica Sicula, a company in Palermo. Registration numbers started with MM.35168.

 

The Z.501 was put into service with some modifications, including; turrets for the machine guns, and some reinforcement of the airframe that increased the overall weight by 500 kg (1,100 lb). The more powerful 656 kW (880 hp) Isotta-Fraschini Asso XI.RC engine was fitted, but even with an additional 97 kW (130 hp), the maximum speed dropped to 245 km/h (152 mph), cruise speed to 200 km/h (120 mph), and range to 2,400 km (1,500 mi).

The first units equipped were No.141 Sqn., Eritrea, No.83 Group, Augusta, No.85, Elmas, kynghidongduong.vn and No.62, Spain (for operations).

By the time Italy entered World War II on 10 June 1940, 202 aircraft were in service in 15 squadrons. They were used by 20 Sqn. and patrolled the Mediterranean, as well as performing air-sea rescue operations.

During the short campaign against France, seven Z.501's were destroyed by a French attack on their base in Sardinia. Another crashed the next day. In July, encounters with Royal Navy Fleet Air Arm fighters and accidents claimed many Z.501s, with a total of 11 destroyed in action, while the number that were operational dropped to 77.

The Z.501 operated in all theatres and 62 aircraft were lost in 1940, leaving 126, of which only 87 were operational. New orders were placed with the manufacturer Aereonautica Sicula.

Z.501's were used for search-and-rescue missions and anti-submarine patrols. They were responsible, in collaboration with Italian ships, for the destruction of HMS Union and damaged three other submarines. But their effectiveness was limited by their bombload of only four 50 kg (110 lb) or two 160 kg (352 lb) bombs.

At the end of 1941, there were Z.501's in 15 of the 27 squadrons dedicated to naval reconnaissance. Strangely, the number of operational aircraft increased to an average of 100, rising six months later to 108 in 11 squadrons, probably due to the arrival of new aircraft.

By the end of 1942, there were 199 aircraft in service, 88 of which were operational. Maritime reconnaissance had at that time 290 aircraft in total.

By September 1943, there were still 240 aircraft assigned to maritime reconnaissance: only 84 were Z.501's, in three squadrons, and another 11 (mixed), out of 20 in total. Only around forty aircraft were operational. Total production, 218 by CANT and 236 by Aereonautica Sicula, was in fact less, as 12 aircraft were captured incomplete after the invasion of Sicily. Later, Aereonautica Sicula repaired many of the ICAF aircraft. Some modifications were adopted during production, such as the removal of the nose machine gun; it was replaced by an enclosed fairing.

Some Z.501s were supplied to Romania and to the Nationalists during the Spanish Civil War. Following Italy's surrender in 1943, a few of these flying boats continued to operate with both the Axis Aeronautica Nazionale Repubblicana and the Allied Italian Co-Belligerent Air Force.

After the armistice, several flew to southern Italy, including the 9 aircraft of 149 Sqn with 80 persons aboard. In October, there were 16 aircraft operational in southern Italy, which dropped to 10 by May 1945. The squadrons involved were No's 141, 147, and 183. After the war 183 Sqn. was based at Elmas with four Z.501s, and these were scrapped in 1950.

Generally, the Z.501 had a mixed reputation. It was pleasant to fly, having low wing loading and good performance. It was quite reliable despite having only one liquid-cooled engine. However, there were problems with the durability of the wooden fuselage, particularly the aircraft built during the war. Its seafaring qualities were poor and the aircraft was susceptible to bad weather conditions. The fuselage would often break up in rough seas. Another problem was the engine nacelle: if the aircraft landed heavily the propeller could crash down into the cockpit.

The aircraft was used in the reconnaissance role thanks to its long endurance, but it was very vulnerable to enemy fighters or even bombers. Perhaps its only air victory was in the Aegean, when a fighter stalled while chasing a Z.501. The aircraft was more often relegated to second-line duties. Sometimes, with well-trained crews, it was able to attack submarines, damaging several of them (perhaps six in total) and contributing to the destruction of two others. The aircraft had no advanced detection systems, only depth charges.

Generally the aircraft's main task was search and rescue missions, and perhaps because of this it was called Mammaiut (another theory is that because it was helpless against enemy aircraft). Even its sea capabilities were not good and often the Z.501 needed to be helped by ships. As for its flying qualities, it was too slow, unmanoeuvrable, and under-armed to put up a defence against enemy fighters. As a result many were shot down.

The Dornier Do 18 was a development of the Do 16 flying boat. It was developed for the Luftwaffe, but Lufthansa got 5 aircraft and used these for tests between the Azores and the North American continent in 1936 and on their mail route over the South Atlantic from 1937 to 1939.

27-29 March 1938 a "Do 18 W" established a seaplane record flying non-stop a straight distance of 8,391 km (5,214 mi) from Start Point, Devon to Caravelas in Brazil.

In 1934, the Dornier Flugzeugwerke started development of a new twin engined flying boat to replace the Dornier Do J "Wal" (Whale) in both military and civil roles. The resultant design, Do 18 retained the layout of the Wal, with a metal hull fitted with distinctive stabilising sponsons, and powered by two engines above the wing in a push-pull layout, but was aerodynamically and hydrodynamically more efficient. It was planned to be powered by two of the new Junkers Jumo 205 diesel engines. Although heavy, these promised to give much lower fuel consumption than conventional petrol engines of similar power.

The first prototype, the Do 18a, registration D-AHIS (and named Monsun by Lufthansa) flew on 15 March 1935, powered by two of the earlier 410 kW (550 hp) Junkers Jumo 5c diesels as the planned Jumo 205s were not yet available. It was lost on 2 November 1935 over the Baltic during high-speed tests. Three further prototypes followed, two (the Do 18d and Do 18b) being prototype military aircraft, and the Do 18c (later redesignated Do 18 V3), a civil prototype.

The Do 18c was delivered to Lufthansa as a Do 18E civil transport (D-ABYM Aeolus), quickly followed by a further two aircraft, (D-AANE Zyklon and D-ARUN Zephir) with a final Do 18E (D-AROZ Pampero) being built in 1938.

A further civil Do 18 was the Do 18F, a modified aircraft with longer wingspan and higher weights built for extended-range flights. The sole Do 18F, D-ANHR, first flew on 11 June 1937. It was later modified with 656 kW (880 hp) BMW 132N radial engines to test a possible upgrage for the Luftwaffe's aircraft, flying in this from on on 21 November 1939 as the Do 18L. It suffered cooling problems, however, and further development of the radial powered Do 18 was abandoned.

In 1936, Lufthansa started a series of endurance trials, culminating on 10-11 September when Zephir, flown by Flugkapitän Blankenburg with Lufthansa Director Freiherr von Gablenz as passenger, was launched by catapult from the seaplane tender Schwabenland at Horta, Azores, flying the 4,460 km (2,270 mi) to New York in 22 hours 12 minutes. Also on 11 September, Aeolus flew from Horta to Hamilton, Bermuda in 18 hours 15 minutes, continuing to New York the next day. For the main leg of the North Atlantic the aircraft needed the help of the catapult on Schwabenland. On 22 September Aeolus returned to Horta in 17:50 h (3850 km). Zephir was catapulted on 28 September at Hamilton. The second Flights to New York followed on 5-6 and 6-7 October and the returnflights this time 17 and 18 October from Sydney, Nova Scotia. The flying boats did not wait for their tender and went on to Lisbon and Travemünde.

In April 1937 D-ARUN Zephir and D-ABYM Aeolus started their service on the South Atlantic mail route from Bathurst, now Banjul, Gambia to Natal, Brazil (3040 km). Catapult ships were based in Bathurst and Fernando de Noronha to allow the aircraft to cross the Atlantic carrying a full load of mail.

In June they were joined by V6 D-AROZ Pampero. Aeolus was lost on 30 July 1937, when it had to make an ocean landing due to engine problems and was heavily damaged when Ostmark tried to retrieve the plane. Pampero (20 August) and Zephir (29 January 1938) also had to make ocean landings. Pampero was lost at sea nearly without trace on 1 October 1938 with a crew of five.

Lufthansa's fifth aircraft was the only Do 18F V7 D-ANNE Zyklon, that first took to the skies on 11 June 1937. This was the only Do 18 with a wider span which enable it to stay in the air with one engine out. This was a special demand of Lufthansa Zyklon was used over the South Atlantic between September 1937 and March 1939. The Do 18s crossed the South Atlantic 73 times.

Zyklon is not the aircraft, that established the England to Brazil distance record from 27-29 March 1938 as often stated.

The record-aircraft D-ANHR was taken from the military production line and was specially prepared. It was flown as a builder's machine with a Lufthansa crew augmented by the works pilot Gundermann. On the way back to the South American station the seaplane tender Westfalen took the plane in the English Channel where it was catapulted to Brazil. On the record flight the conditions were not optimal and the plane did not reached Rio de Janeiro as planned.

In Luftwaffe service, it was obsolete by the outbreak of World War II, but - as the only military flying boat - 62 (58 serviceable) in 6 squadrons were in use mainly on North Sea reconnaissance missions. In 1940 some squadrons changed their base to Norway. The vulnerable and underpowered flying boat was soon relegated to training and the air/sea rescue role. In the middle of 1941 only one Squadron was still operational on Do 18. The Blohm & Voss BV 138 had superseded the Dornier.

A Do 18 was the first German aircraft to be shot down by British aircraft during the war, when one of a formation of three was caught over the North Sea by nine Fleet Air Arm Blackburn Skua fighter-bombers of 803 Naval Air Squadron flying from HMS Ark Royal on 26 September 1939. The flying boat was able to make an emergency landing but was sunk by the destroyer HMS Somali.

The Dornier Do 24 is a 1930s German three-engine flying boat designed by the Dornier Flugzeugwerke for maritime patrol and search and rescue. According to Dornier records, some 12,000 people were rescued by Do 24s during its flying career. A total of 279 were built among several factories from 1937-1945.

The Dornier Do 24 was designed to meet a Dutch navy requirement for a replacement of the Dornier Wals being used in the Dutch East Indies. It was an all-metal monoplane with a broad-beamed hull and stabilising sponsons. The aircraft was powered by three wing-mounted radial engines. The first two aircraft built were fitted with 447 kW (600 hp) Junkers Jumo 205C diesel engines. The next two had 652 kW (875 hp) Wright R-1820-F52 Cyclones, this was to meet a Dutch requirement to use the same engines as the Martin 139. The third aircraft (with Cyclone engines) was the first to fly on 3 July 1937. Six Dutch aircraft (designated Do 24K-1) were built in Germany, followed by a further aircraft built under licence by Aviolanda in the Netherlands (designated Do 24K-2).

 

Only 25 aircraft had been built on the Aviolanda assembly line before the German occupation. The Luftwaffe were interested in the completed and partially completed aircraft. The Dutch production line continued to produce aircraft under German control. 11 airframes were completed with Dutch-bought Wright Cyclone engines, but later models used the BMW Bramo 323R-2. A further 159 Do 24s were built in the Netherlands during the occupation, most under the designation Do 24T-1.

Another production line for the Do 24 was established in Sartrouville, France, during the German occupation. This line was operated by SNCA and was able to produce another 48 Do 24s. After the liberation, this facility produced a further 40 Do 24s, which served in the French Navy until 1952.

37 Dutch- and German-built Do 24s had been sent to the East Indies by the time of the German occupation of the Netherlands in June 1940. Until the outbreak of war, these aircraft would have flown the tri-color roundel. Later, to avoid confusion with British or French roundels, Dutch aircraft flew a black-bordered orange triangle insignia. After the Japanese invasion, six surviving Do 24s were transferred to the Royal Australian Air Force in February 1942. They served in RAAF through most of 1944 as transports in New Guinea, making the Do 24 one of the few aircraft serving operationally on both sides during World War II.

During the war, a German Do 24 made a forced landing in neutral Sweden, was impounded and paid for, and remained in Swedish service until 1952.

In 1944, 12 Dutch-built Do 24s were delivered to Spain with the understanding that they would assist downed airmen of both sides. After the war, a few French-built Do 24s also found their way to Spain. Spanish Do 24s were operational at least until 1967, and possibly later. In 1971, one of the last flying Spanish Do 24s was returned to the Dornier facility on Lake Constance for permanent display.

The Kawanishi H8K, (Nishiki Daitei, Nishiki Taitei) was an Imperial Japanese Navy flying boat used during World War II for maritime patrol duties. The Allied reporting name for the type was "Emily".

At the same time the type's predecessor, the Kawanishi H6K, was going into service in 1938 the Navy ordered the development of a larger, longer-ranged patrol aircraft under the designation Navy Experimental 13-Shi Large-size Flying Boat. The result was a large, shoulder-winged design that is widely regarded as the best flying boat of the war. Despite this, initial development was troublesome, with the prototype displaying terrible handling on the water. Deepening of the hull, redesigning of the planing bottom and the addition of spray strips under the nose rectified this two further prototypes -actually pre-production aircraft- joined the development program in December 1941.

The IJNAF accepted the first production version as the H8K1, Navy Type 2 Flying Boat, Model 11, of which 14 would be built.

The improved H8K2 variant soon appeared, and its extremely heavy defensive armament earned it deep respect among Allied aircrews. The H8K2 was an upgrade over the H8K1, having more powerful engines, slightly revised armament, and an increase in fuel capacity. This was to be the definitive variant, with 112 produced.

36 examples of a dedicated transport version, the H8K2-L, were also built, capable of carrying 62 troops. This aircraft was also known as Seiku ("Clear Sky"). The side defensive blisters, ventral defensive hatch, and dorsal turret were discarded. To increase the available space within the aircraft, its hull tanks were removed, thus reducing its range.

 

 

References

Aversa, R., R.V.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2017a. Nano-diamond hybrid materials for structural biomedical application. Am. J. Biochem. Biotechnol.

Aversa, R., R.V. Petrescu, B. Akash, R.B. Bucinell and J.M. Corchado et al., 2017b. Kinematics and forces to a new model forging manipulator. Am. J. Applied Sci., 14: 60-80.

Aversa, R., R.V. Petrescu, A. Apicella, I.T.F. Petrescu and J.K. Calautit et al., 2017c. Something about the V engines design. Am. J. Applied Sci., 14: 34-52.

Aversa, R., D. Parcesepe, R.V.V. Petrescu, F. Berto and G. Chen et al., 2017d. Process ability of bulk metallic glasses. Am. J. Applied Sci., 14: 294-301.

Aversa, R., R.V.V. Petrescu, B. Akash, R.B. Bucinell and J.M. Corchado et al., 2017e. Something about the balancing of thermal motors. Am. J. Eng. Applied Sci., 10: 200.217. DOI: 10.3844/ajeassp.2017.200.217

Aversa, R., F.I.T. Petrescu, R.V. Petrescu and A. Apicella, 2016a. Biomimetic FEA bone modeling for customized hybrid biological prostheses development. Am. J. Applied Sci., 13: 1060-1067. DOI: 10.3844/ajassp.2016.1060.1067

Aversa, R., D. Parcesepe, R.V. Petrescu, G. Chen and F.I.T. Petrescu et al., 2016b. Glassy amorphous metal injection molded induced morphological defects. Am. J. Applied Sci., 13: 1476-1482.

Aversa, R., R.V. Petrescu, F.I.T. Petrescu and A. Apicella, 2016c. Smart-factory: Optimization and process control of composite centrifuged pipes. Am. J. Applied Sci., 13: 1330-1341.

Aversa, R., F. Tamburrino, R.V. Petrescu, F.I.T. Petrescu and M. Artur et al., 2016d. Biomechanically inspired shape memory effect machines driven by muscle like acting NiTi alloys. Am. J. Applied Sci., 13: 1264-1271.

Aversa, R., E.M. Buzea, R.V. Petrescu, A. Apicella and M. Neacsa et al., 2016e. Present a mechatronic system having able to determine the concentration of carotenoids. Am. J. Eng. Applied Sci., 9: 1106-1111.

Aversa, R., R.V. Petrescu, R. Sorrentino, F.I.T. Petrescu and A. Apicella, 2016f. Hybrid ceramo-polymeric nanocomposite for biomimetic scaffolds design and preparation. Am. J. Eng. Applied Sci., 9: 1096-1105.

Aversa, R., V. Perrotta, R.V. Petrescu, C. Misiano and F.I.T. Petrescu et al., 2016g. From structural colors to super-hydrophobicity and achromatic transparent protective coatings: Ion plating plasma assisted TiO2 and SiO2 Nano-film deposition. Am. J. Eng. Applied Sci., 9: 1037-1045.

Aversa, R., R.V. Petrescu, F.I.T. Petrescu and A. Apicella, 2016h Biomimetic and Evolutionary Design Driven Innovation in Sustainable Products Development, Am. J. Eng. Applied Sci., 9: 1027-1036.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016i. Mitochondria are naturally micro robots-a review. Am. J. Eng. Applied Sci., 9: 991-1002.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016j. We are addicted to vitamins C and E-A review. Am. J. Eng. Applied Sci., 9: 1003-1018.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016k. Physiologic human fluids and swelling behavior of hydrophilic biocompatible hybrid ceramo-polymeric materials. Am. J. Eng. Applied Sci., 9: 962-972.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016l. One can slow down the aging through antioxidants. Am. J. Eng. Applied Sci., 9: 1112-1126.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016m. About homeopathy or jSimilia similibus curenturk. Am. J. Eng. Applied Sci., 9: 1164-1172.

Aversa, R., R.V. Petrescu, A. Apicella and F.I.T. Petrescu, 2016n. The basic elements of life's. Am. J. Eng. Applied Sci., 9: 1189-1197.

Aversa, R., F.I.T. Petrescu, R.V. Petrescu and A. Apicella, 2016o. Flexible stem trabecular prostheses. Am. J. Eng. Applied Sci., 9: 1213-1221.

Mirsayar, M.M., V.A. Joneidi, R.V.V. Petrescu,    F.I.T. Petrescu and F. Berto, 2017 Extended MTSN criterion for fracture analysis of soda lime glass. Eng. Fracture Mechanics 178: 50-59.     DOI: 10.1016/j.engfracmech.2017.04.018

Petrescu, R.V. and F.I. Petrescu, 2013a. Lockheed Martin. 1st Edn., CreateSpace, pp: 114.

Petrescu, R.V. and F.I. Petrescu, 2013b. Northrop. 1st Edn., CreateSpace, pp: 96.

Petrescu, R.V. and F.I. Petrescu, 2013c. The Aviation History or New Aircraft I Color. 1st Edn., CreateSpace, pp: 292.

Petrescu, F.I. and R.V. Petrescu, 2012. New Aircraft II. 1st Edn., Books On Demand, pp: 138.

Petrescu, F.I. and R.V. Petrescu, 2011. Memories About Flight. 1st Edn., CreateSpace, pp: 652.

Petrescu, F.I.T., 2009. New aircraft. Proceedings of the 3rd International Conference on Computational Mechanics, Oct. 29-30, Brasov, Romania.

Petrescu, F.I., Petrescu, R.V., 2016a Otto Motor Dynamics, GEINTEC-GESTAO INOVACAO E TECNOLOGIAS, 6(3):3392-3406.

Petrescu, F.I., Petrescu, R.V., 2016b Dynamic Cinematic to a Structure 2R, GEINTEC-GESTAO INOVACAO E TECNOLOGIAS, 6(2):3143-3154.

Petrescu, F.I., Petrescu, R.V., 2014a Cam Gears Dynamics in the Classic Distribution, Independent Journal of Management & Production, 5(1):166-185.

Petrescu, F.I., Petrescu, R.V., 2014b High Efficiency Gears Synthesis by Avoid the Interferences, Independent Journal of Management & Production, 5(2):275-298.

Petrescu, F.I., Petrescu R.V., 2014c Gear Design, ENGEVISTA, 16(4):313-328.

Petrescu, F.I., Petrescu, R.V., 2014d Balancing Otto Engines, International Review of Mechanical Engineering 8(3):473-480.

Petrescu, F.I., Petrescu, R.V., 2014e Machine Equations to the Classical Distribution, International Review of Mechanical Engineering 8(2):309-316.

Petrescu, F.I., Petrescu, R.V., 2014f Forces of Internal Combustion Heat Engines, International Review on Modelling and Simulations 7(1):206-212.

Petrescu, F.I., Petrescu, R.V., 2014g Determination of the Yield of Internal Combustion Thermal Engines, International Review of Mechanical Engineering 8(1):62-67.

Petrescu, F.I., Petrescu, R.V., 2014h Cam Dynamic Synthesis, Al-Khwarizmi Engineering Journal, 10(1):1-23.

Petrescu, F.I., Petrescu R.V., 2013a Dynamic Synthesis of the Rotary Cam and Translated Tappet with Roll, ENGEVISTA  15(3):325-332.

Petrescu, F.I., Petrescu, R.V., 2013b Cams with High Efficiency, International Review of Mechanical Engineering 7(4):599-606.

Petrescu, F.I., Petrescu, R.V., 2013c An Algorithm for Setting the Dynamic Parameters of the Classic Distribution Mechanism, International Review on Modelling and Simulations 6(5B):1637-1641.

Petrescu, F.I., Petrescu, R.V., 2013d Dynamic Synthesis of the Rotary Cam and Translated Tappet with Roll, International Review on Modelling and Simulations 6(2B):600-607.

Petrescu, F.I., Petrescu, R.V., 2013e Forces and Efficiency of Cams, International Review of Mechanical Engineering 7(3):507-511.

Petrescu, F.I., Petrescu, R.V., 2012a Echilibrarea motoarelor termice, Create Space publisher, USA, November 2012, ISBN 978-1-4811-2948-0, 40 pages, Romanian edition.

Petrescu, F.I., Petrescu, R.V., 2012b Camshaft Precision, Create Space publisher, USA, November 2012, ISBN 978-1-4810-8316-4, 88 pages, English edition.

Petrescu, F.I., Petrescu, R.V., 2012c Motoare termice, Create Space publisher, USA, October 2012, ISBN 978-1-4802-0488-1, 164 pages, Romanian edition.

Petrescu, F.I., Petrescu, R.V., 2011a Dinamica mecanismelor tour hà giang de distributie, Create Space publisher, USA, December 2011, ISBN 978-1-4680-5265-7, 188 pages, Romanian version.

Petrescu, F.I., Petrescu, R.V., 2011b Trenuri planetare, Create Space publisher, USA, December 2011, ISBN 978-1-4680-3041-9, 204 pages, Romanian version.

Petrescu, F.I., Petrescu, R.V., 2011c Gear Solutions, Create Space publisher, USA, November 2011, ISBN 978-1-4679-8764-6, 72 pages, English version.

Petrescu, F.I. and R.V. Petrescu, 2005. Contributions at the dynamics of cams. Proceedings of the 9th IFToMM International Symposium on Theory of Machines and Mechanisms, (TMM' 05), Bucharest, Romania, pp: 123-128.

Petrescu, F. and R. Petrescu, 1995. Contributii la sinteza mecanismelor de distributie ale motoarelor cu ardere internã. Proceedings of the ESFA Conferinta, (ESFA' 95), Bucuresti, pp: 257-264.

Petrescu, FIT., 2015a Geometrical Synthesis of the Distribution Mechanisms, American Journal of Engineering and Applied Sciences, 8(1):63-81. DOI: 10.3844/ajeassp.2015.63.81

Petrescu, FIT., 2015b Machine Motion Equations at the Internal Combustion Heat Engines, American Journal of Engineering and Applied Sciences, 8(1):127-137. DOI: 10.3844/ajeassp.2015.127.137

Petrescu, F.I., 2012b Teoria mecanismelor - Curs si aplicatii (editia a doua), Create Space publisher, USA, September 2012, ISBN 978-1-4792-9362-9, 284 pages, Romanian version, DOI: 10.13140/RG.2.1.2917.1926

Petrescu, F.I., 2008. Theoretical and applied contributions about the dynamic of planar mechanisms with superior joints. PhD Thesis, Bucharest Polytechnic University.

Petrescu, FIT.; Calautit, JK.; Mirsayar, M.; Marinkovic, D.; 2015 Structural Dynamics of the Distribution Mechanism with Rocking Tappet with Roll, American Journal of Engineering and Applied Sciences, 8(4):589-601. DOI: 10.3844/ajeassp.2015.589.601

Petrescu, FIT.; Calautit, JK.; 2016 About Nano Fusion and Dynamic Fusion, American Journal of Applied Sciences, 13(3):261-266.

Petrescu, R.V.V., R. Aversa, A. Apicella, F. Berto and S. Li et al., 2016a. Ecosphere protection through green energy. Am. J. Applied Sci., 13: 1027-1032. DOI: 10.3844/ajassp.2016.1027.1032

Petrescu, F.I.T., A. Apicella, R.V.V. Petrescu, S.P. Kozaitis and R.B. Bucinell et al., 2016b. Environmental protection through nuclear energy. Am. J. Applied Sci., 13: 941-946.

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Bucinell, Ronald; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017a Modern Propulsions for Aerospace-A Review, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Bucinell, Ronald; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017b Modern Propulsions for Aerospace-Part II, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Bucinell, Ronald; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017c History of Aviation-A Short Review, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Bucinell, Ronald; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017d Lockheed Martin-A Short Review, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017e Our Universe, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, Relly Victoria; Aversa, Raffaella; Akash, Bilal; Corchado, Juan; Berto, Filippo; Mirsayar, MirMilad; Apicella, Antonio; Petrescu, Florian Ion Tiberiu; 2017f What is a UFO?, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, RV., Aversa, R., Akash, B., Corchado, J., Berto, F., Mirsayar, MM., Apicella, A., Petrescu, FIT., 2017 About Bell Helicopter FCX-001 Concept Aircraft-A Short Review, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, RV., Aversa, R., Akash, B., Corchado, J., Berto, F., Mirsayar, MM., Apicella, A., Petrescu, FIT., 2017 Home at Airbus, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, RV., Aversa, R., Akash, B., Corchado, J., Berto, F., Mirsayar, MM., Kozaitis, S., Abu-Lebdeh, T., Apicella, A., Petrescu, FIT., 2017 Airlander, Journal of Aircraft and Spacecraft Technology, 1(1).

Petrescu, RV., Aversa, R., Akash, B., Corchado, J., Berto, F., Apicella, A., Petrescu, FIT., 2017 When Boeing is Dreaming - a Review, Journal of Aircraft and Spacecraft Technology, 1(1).